Dissertations in the library and archive of the Institute
(Dissertations for the last three years are stored in the library)
AND
Azime H.Optimizing the technology of applying ceramic detonation coatings on equipment parts of the oil-mining and oil-refining industry and studying their properties: diss. … candidate technical Sciences: 05.02.01. – K. : ISM named after V.N. Bakulya, 1994. – 129 p. – (No. 229).
Aleksandrova L.I.Increasing the strength and durability of hard alloys as a result of heat treatment: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1985. – 231 p. – (No. 144 DSP).
Alikhanyan E.S.Research of the process of profile deep diamond grinding of hard-alloy metal-cutting tools: dissertation …candidate of technical sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K.: Institute of superhard materials of the Academy of Sciences of the Ukrainian SSR, 1979. – 221 p. – (№ 22).
Andreev I.V. Regularities of formation of the structure and physical and mechanical properties of tungsten heavy alloys with a high content of nickel-iron bonds: dissertation …candidate of technical sciences: 05.02.01: materials science. – K.: Institute of superhard materials named after V.M. Bakul, NAS of Ukraine, 2010. – 149 p. – (№ 301).
Androsov I.M. Mechanical properties of boron nitride polycrystals in a wide temperature range of 300-1400 K: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1984. – (No. 119 DSP).
Akhundov E.A.Investigation of the process of sharpening tools from low-tungsten high-speed steels with cubic boron nitride wheels: diss. … candidate technical Sciences: 05.03.01. – K. : ISM Academy of Sciences of the Ukrainian SSR, 1978. – 192 p. – (No. 15).
B
Balabanov P.A.Increasing the operational characteristics of high-pressure steel devices by increasing the strength of the matrix material: diss. … candidate technical Sciences: 05.02.01: materials science. K. : V.N. Bakul Institute of Superhard Materials, NAS of Ukraine, 2008. – 154 p.; append.: p. 155-160. – (№ 286).
Barvitsky, Pavlo Petrovich. Regularities of formation of the structure of structural impact-resistant materials based on refractory borides under thermobaric sintering conditions: diss. … candidate of technical sciences: 05.02.01 – Materials science / NAS of Ukraine, V.M. Bakul Institute of Superhard Materials. – K., 2021. – 217 p.; append.: p. 218–223. – (№ 348).
Bevza Yu.V. Formation of heterophase materials for structural and tool purposes based on boron carbide and aluminum dodecaboride: diss. … candidate of technical sciences sciences: 05.02.01: materials science in mechanical engineering. – K.: Institute of superhard materials of the Academy of Sciences of the Ukrainian SSR, 1986. – 209 p. – (№ 149 DSP).
Bezhenar M.P. Scientific foundations of sintering of cubic boron nitride composites at high pressure: dissertation … doctor of technical sciences: 05.02.01: materials science. – K.: Institute of superhard materials named after V.M. Bakul, NAS of Ukraine, 2002. – 422 p. – (№ 255).
Bezhenar N.P. Regularities of sintering polycrystals from cubic boron nitride micropowders at high static pressures and temperatures in the presence of activating additives: dissertation …candidate of technical sciences: 05.02.01: materials science in mechanical engineering. K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1987. – 237 p. – (No. 167 DSP).
Berdnikov L.N.Methods and means of increasing the efficiency of the blade tool during intermittent cutting: diss. … Dr. technical Sciences: 05.03.01. – L. : Leningrad Polytechnic. Institute, 1990. – 341 p. – (No. 224 DSP).
Bychevoi V.G.Increasing the thermomechanical properties of a composite material based on cubic zirconium dioxide: dissertation. … candidate technical Sciences: 05.02.01. – K. : ISM Academy of Sciences of the Ukrainian SSR, 1991. – 113 p. – (No. 203).
Bogatyreva H.P.Directional change in the chemical composition and energy state of the grain surface of synthetic diamond powders for instrumental use: dissertation. dr. technical Sciences: 05.02.01: materials science in machine building (industry); 02.00.18: chemistry, physics, surface technology. – K. : Institute of Superhard Materials named after V.N. Bakulya Academy of Sciences of the Ukrainian SSR, 1991. – 360 p.; app.: p. 360-534. – (No. 206 DSP).
Bondarev K.E.Development of composites based on invert vitreous binders to increase the performance of the cubonite tool: thesis. … candidate technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya National Academy of Sciences of Ukraine, 1997. – 164 p. – (No. 241).
Bondarenko V.P.Composites for friction pairs lubricated by low-viscosity liquids: dis. … Dr. technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1987. – 543 p. – (No. 168 DSP).
Bondar I.V.Laws of formation of metallization coatings on diamond powders during vacuum sputtering: diss. … candidate technical Science: 05.02.01: materials science in machine building (industry). – K. : Institute of Superhard Materials named after V.N. Bakulya Academy of Sciences of Ukraine, 1991. – 203 p. – (No. 213 DSP).
Borymsky A.I.Creation of high-performance high-pressure devices with tool steel matrices for the synthesis of monocrystalline superhard materials: dissertation. … candidate technical Sciences: 05.02.01: materials science in machine buildingии (industry). – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1990. – 316 p.; app.: p. 317-396. – (No. 202 DSP).
Bochecka A.A.Scientific basis of sintering of diamond-based composites at high pressure: diss. … Dr. technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya, National Academy of Sciences of Ukraine, 2002. – 365 p. – (No. 258).
Bochecka A.A.Sintering of blanks for wire from diamond micropowders in the presence of a metallic phase at high static pressures: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1987. – 144 p. – (No. 164).
Bugaev A.A.Research and development of synthetic diamond-impregnated crowns and their effectiveness in drilling exploration wells: diss. … candidate technical Sciences: 138: exploration technique of mineral deposits. – K. : ISM, 1969. – 408 p. – (No. 43).
Budnyk S.N.Formation of wear-resistant surfaces by the method of anti-friction-hardening treatment with accompanying lamination: diss. … candidate technical Sciences: 05.02.08: mechanical engineering technology. – K: Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 234 p. – (No. 209).
Bui Shong Kau.Theory of design of cutting heads for cutting spiral-toothed bevel gears by a new continuous method: Dissertation … Doctor of Technical Sciences: 05.03.01. – K.: KPI, 1987. – 299 p. – (№ 177).
Buketov A.V. Regularities of influence of processing of binder and fillers by energy fields on properties of epoxy composite materials for protective coatings: Dissertation … Doctor of Technical Sciences: 05.02.01 / NAS of Ukraine. Ternopil State Technical University named after I. Pulyu. – Ternopil, 2007. – 337 p. – (№ 280).
Burman L.L. Study of the process of fine grinding of optical glass blanks with a diamond tool: Dissertation … Candidate of Technical Sciences sciences: 05.259: Instrumentation technology. – K.: ISM AN UkrSSR, 1970. – 219 p. – (№ 32).
Burkhan A.A. Obtaining composite diamond-containing materials by metallothermy method: diss. … candidate of technical sciences: 05.02.01: materials science in mechanical engineering. – K.: Institute of superhard materials AN UkrSSR, 1984. – (№ 136 DSP).
Burchenya, Andriy Vitaliyovich. Directed control of growth parameters for obtaining structurally perfect single crystals of diamond type Ib weighing from 5 to 10 carats in six-punch presses: diss. … candidate of technical sciences: special. 05.02.01 – Materials science / V.M. Bakul Institute of superhard materials NASU. – K., 2019. – 188 p.; add.: p. 189–196. – (№ 345).
In
Vasylchuk, Oleksandr Serhiyovych. Determination of the influence of the diamond content in composite diamond-containing materials obtained by electrosintering on the wear resistance of functional elements of rock-breaking tools: dissertation for the degree of Doctor of Philosophy: speciality 132 – Materials Science (13 – “Mechanical Engineering”) / NAS of Ukraine, V.M. Bakul Institute of Superhard Materials. – K., 2023. – 165 p. : add.: p. 166–185. – (№ 357).
Verezub N.V. Investigation of the process of cutting polymer composite materials with diamond end mills: thesis. – Kh., 1978. – 262 p. – (No. 17).
Vernyk E.B.Investigation of the forming process and properties of diamond-containing rolled steel: 05.16.06: powder metallurgy / Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR. – K., 1974. – 159 p. – (No. 34).
Vinogradov A.A.Scientific basis of high-performance drilling of hard-to-treat metals with carbide drills of two-sided cutting: diss. … Dr. technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1984. – 447 p. – No. 137).
Vinogradov S.A.Criteria for choosing the material of the container of high-pressure devices: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : / Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1986. – 210 p. – (No. 160 DSP).
Volkova T. M.Investigation of the process of manual flat finishing with synthetic diamond and cubonite pastes: diss. … candidate.. tech.. science: 05.171 / Perm Polytechnic. Inst. – Perm, 1972. – 162 p. – (No. 52).
Voloshin M.N.Structural and phase transformations in cast iron during the dynamic synthesis of diamond: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1981. – 220 p. – (No. 76 DSP).
Vorona, Tatiana Vitalievna.Increasing the wear resistance of gas-thermal steel coated with electrocontact treatment using carbon-containing fillers: diss. … candidate technical Sciences: 05.02.01 – Materials Science / Kirovohrad National University technical Univ. – Kropyvnytskyi, 2016. – 171 p.; app.: p. 172–232. – (Protection at the Institute of Superhard Materials named after V.N. Bakul, National Academy of Sciences of Ukraine). – (No. 331).
Voronin G. AND.Durability of synthetic diamonds in a wide range of temperatures: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1984. – 201 p. – (No. 123).
Vysotsky Yu.I.Study of strength, durability and reliability of carbide cutting tools cutters in connection with the self-oscillations of the AIDS system: diss. … candidate of technical sciences: 05.03.01 / Kramatorsk Industrial Institute – Kramatorsk, 1979. – 288 p. – (№ 20).
G
Gavrilova, Valentina Stepanivna. Creation of a technologically filled epoxy-polysiloxane coating on titanium alloys to prevent seizing with the tool during deforming boring of holes: diss. … candidate of technical sciences: special. 05.02.01 – Materials Science / NAS of Ukraine, V.M. Bakul Institute of Superhard Materials. – K., 2019. – 180 p.; add.: p. 181. – (№ 341).
Garbuz T.O. Regularities of formation of structure and properties of superhard composites in the cubic boron nitride–titanium diboride–aluminum system under high pressure conditions: Diss. …. Candidate of Technical Sciences: 05.02.01: Materials Science. – Kyiv: V.M. Bakul Institute of Superhard Materials, NASU, 2010. – 170 p. – (№ 296).
Garan A.G. Melting diagram and regularities of diamond crystallization in the Al-Ni-C system at high pressures: Diss. … Candidate of Technical Sciences: 05.02.01: Materials Science. – Kyiv: V.M. Bakul Institute of Superhard Materials, NASU, 2007. – 121 p. – (№ 281).
Gargin V.G. Study of thermal strength of synthetic diamonds under conditions of diamond tool manufacturing: Diss. … candidate technical Science: 05.03.02: instrument production. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1977. – (No. 7 DSP).
Hasin D.A.Obtaining powder coatings using an electropulse plasma accelerator: dissertation. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1986. – 288 p. – (No. 150 DSP).
Gevorkyan E. WITH.Development of a composite material based on chromium oxide for a blade tool: dissertation. … candidate technical Sciences: 05.02.01. – K. : ISM Academy of Sciences of the Ukrainian SSR, 1989. – 219 p. – (No. 195 DSP).
Gerasimovych A.V.Research of deformable compacted high-pressure devices: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1983. – 318 p. – (No. 99 DSP).
Hetman A.F.The influence of the composition of the charge and synthesis parameters on the process of obtaining synthetic diamonds of small fractions: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1984. – (No. 118 DSP).
Ginzburg B.I.Prospects for the use of synthetic diamonds in industry: diss. … candidate technical Sciences / UkrNYKTISSMY of the State Plan of the Ukrainian SSR. – K., 1967. – 294 p. – (No. 41).
Ginzburg B.I.Economic and organizational problems of creation and application of new instrumental materials (for example, superhard materials): diss. … Dr. of Economic Sciences: 08.00.26: economics, planning and management of scientific and technical progress / Institute of Economics, Academy of Sciences of the Ukrainian SSR. – K., 1985. – (No. 179 DSP).
Glyzhinsky A. D.Study of the process of shaping conical screw surfaces of gear wheels with disk-shaped milling cutters: diss. … candidate technical Sciences: 05.03.01. – K. : ISM of the Academy of Sciences of Ukraine, 1993. – 234 p. – (No. 230).
Hnatenko, Iryna Oleksandrivna.Improvement of the method of assessing the condition of the carbide skeleton of tungsten hard alloys and determining the influence of technological factors on it: diss. … candidate technical Sciences: 05.02.01 – Materials Science / NAS of Ukraine, Institute of Superhard Materials named after V.M. Bakula – K., 2016. – 188 p.; add.: p. 189–198. – (No. 332). – (Defence 02.03.2017).
Gordashnyk K.Z.Investigation of the process of diamond sharpening of a carbide tool for processing wood materials in order to increase its wear resistance: diss. … candidate technical of Sciences: 05.21.01: processes and technology of forestry, logging, forestry, sawmill and woodworking productions / Leningradskaya Lesotehnicheskaya Acad. named after S.M. Kirov. – K., 1974. – 242 p. – (No. 37).
Gordeev, Serhii Oleksandrovych.Directed control of nucleation density during spontaneous solution-melt crystallization of diamond single crystals with increased uniformity of properties: dissertation … candidate of technical sciences: 05.02.01 – Materials science / NAS of Ukraine, V.M. Bakuly Institute of Superhard Materials. – K., 2021. – 165 p.; add.: p. 166–172. – (№ 351).
Gorpinchenko V.D. Increasing the durability of tungsten hard alloy intended for the manufacture of products operating under repeated variable loading: dissertation candidate of technical sciences: 05.02.01: materials science in mechanical engineering. – K.: Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1989. – 172 p. – (№ 188 DSP).
Grechuk, Andriy Igorovich. Increasing the efficiency of the drilling process of carbon-fiber and fiberglass with diamond-blade drills: dissertation … candidate of technical sciences: special 05.03.01 – Mechanical processing processes, machines and tools / NAS of Ukraine, V.M. Bakulya Institute of Superhard Materials. – K., 2019. – 149 p.; add.: p. 150–158. – (№ 344).
Grigoriev N.M. Optimization of the design of a toroid-type high-pressure apparatus for sintering diamond-hard alloy plates with a diameter of 13.5 mm and more: dissertation … candidate of technical sciences: 05.02.01: materials science. – K.: V.N. Bakulya Institute of Superhard Materials NAN of Ukraine, 1999. – 230 p. – (No. 247 DSP).
Grynev V.F.Research and development of the process of manufacturing diamond straightening tools for rough grinding by the electrometallization sputtering method: diss. … candidate technical Sciences: 05.03.01 / Ukr. Polygraphic Institute – Lviv, 1978. – 272 p. – (No. 19).
D
Dalnyk P.E.Increasing the efficiency of the process of turning heat-resistant nickel alloys with a cubic boron nitride tool: diss. … candidate technical Sciences: 05.03.01: processes of mechanical and physical-technical processing; machines and tools. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1990. – 178 p. – (No. 197 DSP).
Devin L.N.Investigation of fracture resistance of hard alloys and superhard materials in a wide range of deformation rates: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials, Academy of Sciences of the USSR, 1981. – 174 p. – (No. 81).
Devin L.N.Prediction of the reliability of cutting tools from hard alloys and polycrystalline superhard materials: diss. … Dr. technical Sciences: 05.02.01: materials science; 05.03.01: mechanical processing processes, machines and tools. – K. : Institute of Superhard Materials named after V.N. Bakulya of the National Academy of Sciences of Ukraine, 1996. – (No. 240).
Devytsky O.A.Increasing the efficiency of grinding materials with NTM wheels taking into account electrical phenomena accompanying abrasive processing: dissertation … candidate of technical sciences: 05.03.01: mechanical processing processes, machines and tools / NAS of Ukraine. V.M. Bakuly Institute of Superhard Materials. – K., 2014. – 152 p.; appendices: p. 153–177. – (№ 313).
Degtyarenko S.M. Intensification of processing of tungsten-free hard alloys by intermittent diamond grinding: dissertation … candidate of technical sciences: 05.03.01: mechanical and physical-chemical processing processes, machines and tools. – K.: Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1985. – 304 p. – (№ 145 DSP).
Demidov V.N. Increase in corrosion resistance of steel as a result of TMO surfaces: microfiche diss. … candidate technical of science – M. : MINGP, 1979. – (No. 73).
Dzhelyalov S.I.Regularities in the formation of the structure and properties of ceramic material for instrumental use in the ZrO2–Al–C system: diss. Ph.D. technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya National Academy of Sciences of Ukraine, 2008. – 170 p.; app.: p. 171-187. – (No. 290).
Dobrovolskyi H.G.Research of thermal processes during deforming drawing with the aim of optimizing the design of the tool and drawing modes: diss. … candidate technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines / Institute of Superhard Materials of the Academy of Sciences of the USSR. – K., 1978. – 172 p. – (№ 16).
Doroshenko O.O. Creation and properties of luminous coatings based on amorphous carbon from high-frequency plasma: dissertation …candidate of technical sciences: 05.02.01: materials science in mechanical engineering. – K.: Institute of Superhard Materials named after V.M. Bakul, NAS of Ukraine, 1994. – 157 p. – (№ 228).
Drozhzhin V.I. Physical features and laws of the process of cutting laminated plastics: dissertation …doctor of technical sciences: 05.03.01 / Kharkov Polytechnic Institute – Kharkov, 1982. – 390 p. – (№ 111).
Dub S.N. Scientific basis for determining the mechanical properties of hard and superhard materials at the nano-level by the method of nanoindentation: diss. … Dr. technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya National Academy of Sciences of Ukraine, 2013. – 305 p.; app.: p. 306–311. – (#312).
Dub S.N.Determination of crack resistance of single crystals of superhard materials: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1984. – 168 p. – (No. 127 chipboard).
Dubrova O.E.Patterns of formation and abrasive use of two-frame metal-polymer composites from powdered diamonds and cubonite: dissertation. … candidate technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.M. Bakulya of the National Academy of Sciences of Ukraine, 2008. – 182 p.; attachments: p. 183–192. – (No. 288).
Dubrovsky A.A.The cutting process, wear and operational properties of cutting tools from titanium hard alloys when processing cast iron: diss. … candidate technical Sciences: 05.03.01. – M. : VNIITS, 1984. – 249 p. – (No. 124).
Duda T.M.Composite electrochemical coatings for diamond powders: diss. … candidate technical Sciences: 05.17.03: electrochemical production. – K. : ISM Academy of Sciences of the Ukrainian SSR. Kyiv Polytechnic Institute, 1981. – 217 p. – (No. 103 DSP).
Dudnyk N.P.Intensification of the process of tooth grinding with conical wheels by the method of running-in: diss. … candidate technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1984. – (No. 133).
THERE ARE
Elistratov V.I.Research of carbide dies for cutting thick-sheet steels: diss. … candidate technical Sciences: 05.165: equipment and machines of forge and press production. – K. : ISM Gorky Polytechnic. institute named after A.A. Zhdanova, 220 p. – (No. 46).
Elovykov V.P.Experimental study of a vacuum arc in a longitudinal magnetic field: thesis with. … candidate technical Sciences: 01.04.08: plasma physics. – K. : ISM Academy of Sciences of the Ukrainian SSR. Kharkiv State University named after M. Gorky, 1988. – 255 p. – (No. 191 DSP).
Emelyanov A.B.Development of a diamond superfinishing tool on fiberglass in the Na2O–Mo2O3–B2O3 system: diss. … candidate technical Sciences: 05.02.01: materials science in machine building (industry). – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1990. – 207 p. – (No. 199).
THERE ARE
Yevdokymova, Olga Vyacheslavivna.Regularities of formation of structure and properties of highly efficient tribotechnical composites from ultra-coarse-grained powders of high-modulus carbides: Diss. … Candidate of Technical Sciences: 05.02.01 – Materials Science / NAS of Ukraine, V.M. Bakuly Institute of Superhard Materials. – K., 2016. – 153 p.; add.: p. 154–160. – (№ 333). – (Defense 02.03.2017).
Z
Zavin V.V. Study of performance indicators of diamond toothed hones for finishing processing of hardened gears: Diss. … Candidate of Technical Sciences: 05.03.02: tool production. – K.: Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1977. – 252 p. – (№ 8).
Zaitseva, Irina Nikolaevna.Increasing the homogeneity of diamond grinding powders in terms of strength and size by selective selection of defective crystals using sieve, magnetic, and electric methods: diss. … candidate technical Sciences: 05.02.01 – Materials Science / NAS of Ukraine, Institute of Superhard Materials named after V.N. Bakula – K., 2016. – 167 p.; app.: p. 168–182. – (No. 328).
It was eaten by R.V.Laws of influence of the composition and method of obtaining the explosive composition and polymer carrier on the properties of the detonating waveguide: diss. … candidate technical Science: 05.02.01 / Shostkinsky Gos. Scientific Research Institute of Chemistry Produktov. – Shostka, 2010. – 170 p. – (No. 298).
Sweeping V.V.Study of the durability of the housings of diamond disc saws in the process of cutting construction materials. … candidate technical Sciences: 01.02.03: resistance of materials and construction mechanics. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1975. – 179 p. – (No. 36).
Zarytsky A.S.Development of composite diamond-containing electrochemical materials: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1986. – 179 p. – (No. 154 DSP).
A.I. ZakharenkoPeculiarities of the tool operation during deforming stretching with the imposition of longitudinal oscillations on the tool: diss. … candidate technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1984. – 197 p. – (No. 135).
I
Ivanov S.A.The influence of composition and structure on the electrophysical properties of titanium nitride coatings on tool steels: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1988. – 206 p. – (No. 183 DSP).
S.A. IvakhnenkoPatterns of directional growth of diamond single crystals in the field of thermodynamic stability: diss. … Dr. technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya, National Academy of Sciences of Ukraine, 1998. – 299 p. – (No. 243 DSP).
Ivzhenko V.V.Structural materials based on silicon and titanium nitrides for use in gas turbine engine components: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 227 p. – (No. 185 DSP).
Ignatush A.I.Laws of sintering of two-layer composite superhard materials based on cubic boron nitride: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1987. – 219 p. – (No. 173 DSP).
Ilnytskaya G.D.Adhesion-magnetic sorting of grinding powders of synthetic diamonds: diss. … candidate technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya, National Academy of Sciences of Ukraine, 2002. – 191 p. – (No. 252 DSP).
Iosafov A.V.Research on the process of crimping thick-walled pipe blanks: dissertation. … candidate technical Sciences: 05.03.05 / ISM Academy of Sciences of the Ukrainian SSR. – L., 1981. – 234 p. – (No. 105 DSP).
Isakov E.I.Research and development of a carbide tool for drilling reinforced concrete in mine construction: diss. … candidate technical Sciences: 05.172: mining machines. – K. : ISM, 1971. – 181 p. – (No. 35).
Itsenko P.P.Diagram of the state and regularities of the synthesis of cubic boron nitride in the Mg-B-N system: diss. … candidate technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya, National Academy of Sciences of Ukraine, 2006. – 135 p. – (No. 274).
Itskovich M.S.Research and development of complex-profile diamond wheels for grinding carbide-tipped and tooth-working tools: diss. … candidate technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1979. – 234 p. – (No. 23).
Ishchenko E.S.Surface modification and hardening by pulsed plasma flows: diss. … candidate technical Sciences: 05.02.01: materials science in machine building (industry). – K. : Institute of Superhard Materials named after V.N. Bakulya Academy of Sciences of Ukraine, 1993. – 235 p. – (No. 225).
K
Kabanovsky L.N.Investigation of features of the process of flat diamond grinding of hard alloy with steel: diss. … candidate technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1981. – 230 p. – (No. 80).
T.V. KazakovaIncreasing the reliability of carbide turning cutters based on the study of the contact destruction process and the improvement of their forced strength tests: diss. … candidate technical Sciences: 07.05.01. – Kramatorsk: Kramatorsk Industrial Institute, 1986. – 298 p. – (No. 148).
Kaidash O.N.Development of corrosion-resistant cermets based on titanium nitride with increased resistance in biologically active environments: diss. … candidate of technical sciences: 05.02.01: materials science in mechanical engineering (industry). – K.: V.N. Bakul Institute of Superhard Materials, Academy of Sciences of Ukraine, 1991. – 193 p. – (№ 211 DSP).
Kaidash, Oksana Mykolaivna. Scientific foundations of the formation of the structure and properties during sintering of submicron refractory carbides and nitrides of high-tech ceramics for the mechanical engineering industry: dissertation … doctor of technical sciences: 05.02.01 – Materials science / NAS of Ukraine, V.M. Bakul Institute of Superhard Materials. – K., 2018. – 329 p.; add.: p. 330–362. – (№ 336).
Kalba E.N. Development of composite coatings based on epoxy resin, carbides and oxides for surface protection of parts of oil pumping equipment: diss. … candidate technical Sciences: 05.02.01. – K. : ISM Academy of Sciences of the Ukrainian SSR, 1987. – (No. 171 DSP).
Kamenev N.M.Ways to increase the durability of wool from tungsten-cobalt hard alloys: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : ISM Academy of Sciences of the Ukrainian SSR, 1986. – 217 p. – (No. 153).
Caplun V.G.Scientific basis of the technology of hardening of machine and tool parts by ion nitriding in anhydrous media: dissertation. … Dr. technical Science: 05.02.01 / Khmelnytsky technologist. inst. – Khmelnytskyi, 1991. – 451 p. – (No. 205 – chipboard).
Kaplun P.V.Effect of coatings on the wear resistance and durability of rolling bearings: Diss. … candidate technical Sciences: 05.02.01 / Khmelnytskyi state. Univ. – K., 2004. – 184 p. – (No. – 263).
Karban V.I.Development and research of diamond pastes for grinding and polishing substrates of electronic devices: diss. … candidate technical of science – M.; K. : ISM Academy of Sciences of the Ukrainian SSR; Moscow Institute of Electronic Technology, 1975. – 251 p. – (No. 29 DSP).
Karpovych N.S.Investigation of the technological possibilities of honing hardened cast iron with diamond bars on porous ties: diss. … candidate technical Science: 05.02.08: mechanical engineering technology. – K. : ISM Academy of Sciences of the Ukrainian SSR. Bryansk Institute of Transport Engineering, 1977. – 280 p. – (No. 31).
Karpus A.N.Diamond grinding of titanium drums-cathodes: diss. … candidate technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1984. – 203 p. – (No. 122).
Katrusha A.N.Management of defect-impurity composition of single crystals of natural and synthetic diamond during growth and thermobaric processing: diss. … candidate technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya, National Academy of Sciences of Ukraine, 2004. – 164 p. – (No. 267 DSP).
Katsai M.Ya.Management of the process of spontaneous crystallization of diamond in order to obtain high-strength heat-resistant single crystals: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1986. – 262 p. – (No. 155 DSP).
Kebko V.P.Development of single-layer diamond-containing coatings for instrumental use based on adhesive-active metal alloys: diss. … candidate technical Sciences: 05.02.01: materials science in machine building (industry). – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1990. – 165 p. – (No. 200).
Kirishchyan V.O.Study of dynamic processes during grinding with wheels made of diamond, elbor and electrocorundum: diss. … candidate technical Sciences: 05.03.01 / Armenian Agricultural Institute – Yerevan, 1979. – 165 p. – (No. 18).
Klymenko S.A.Basics of blade processing of wear-resistant protective coatings: diss. … Dr. technical Sciences: 05.03.01: mechanical processing processes, machines and tools. – K. : Institute of Superhard Materials named after V.N. Bakulya, National Academy of Sciences of Ukraine, 1999. – 461 p. – (No. 246).
Klymenko, Serhii Anatoliyovych (junior).Increasing the stability of polycrystalline cubic boron nitride tools when turning hardened steels by applying a coating: 05.03.01 – Mechanical processing processes, machines and tools / NAS of Ukraine, V.M. Bakul Institute of Superhard Materials. – K., 2015. – 194 p.; add.: p. 195–201. – (№ 324).
Klochkov Volodymyr Kyrylovych. Polyfunctional nanostructured inorganic and organic-inorganic materials for biomedical applications: dissertation …doctor of technical sciences: 05.02.01 – Materials science / NAS of Ukraine, V.M. Bakul Institute of Superhard Materials of NAS of Ukraine. – K., 2024. – 355 p.; add.: p. 356–389. (360 Diss.).
Klochok Vyacheslav Yurievich. Regularities of formation of carbon solvents composition by powder metallurgy method for Obtaining structurally perfect single crystals of diamonds in growth volumes up to 160 m3: dissertation for the degree of Doctor of Philosophy: special 132 – Materials Science / NAS of Ukraine, V.M. Bakul Institute of Superhard Materials. – K., 2023. – 152 p. : add.: p. 153–162. – (№ 355).
Kovalenko, Tetyana Viktorivna. Regularities of crystallization of semiconductor single crystals of diamond in growth systems with magnesium: dissertation … candidate of technical sciences: 05.02.01 – Materials Science; 13 – Mechanical Engineering / NAS of Ukraine, V.M. Bakul Institute of Superhard Materials. – K., 2017. – 179 p.; add.: p. 180–181. – (No. 334).
Kovalev S.V. Increasing the efficiency of finishing complex-profile surfaces of natural stone parts: Diss. … Candidate of Technical Sciences: 05.03.01: mechanical processing processes, machines and tools. – K.: V.M. Bakul Institute of Superhard Materials, NAS of Ukraine, 2011. – 177 p.; appendices: p. 178–204. – (No. 302).
Kovyzhenko G.I. Study of the diamond processing process of the working channel of hard-alloy wires: Diss. … Candidate of Technical Sciences: 05.03.01: processes and machines for cutting materials; automatic lines. – K.: Institute of Superhard Materials, NAS of Ukraine, 1981. – 219 p. – (No. 77).
Kodrik A.I. Increasing the machinability of highly ductile steels during cutting drawing: dissertation … candidate of technical sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K.: Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1983. – 173 p. – (№ 117).
Kozyrev, Artem Vyacheslavovich. Scientific principles of thermobaric formation of nanostructures of materials for electrical purposes based on MgB2 with a high level of superconducting properties: dissertation … doctor of technical sciences: 05.02.01: materials science / NAS of Ukraine, Institute of Superhard Materials named after V.M. Bakuly. – K., 2020. – 304 p. – (№ 347).
Kolomiets V.V. Research and development of methods for fine-tuning diamond straightening rollers for plunge grinding: dissertation … candidate technical Sciences: 05.03.02: instrument production. – K: Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1976. – 218 p. – (No. 1).
Kolomiets V.V.Scientific basis of the technology of manufacturing complex-profile tools from synthetic diamonds for the processes of high-performance precision mortise grinding: diss. … Dr. technical Sciences: 05.03.01: processes of mechanical and physical-technical processing; machines and tools. – K. : Institute of Superhard Materials named after V.N. Bakulya Academy of Sciences of Ukraine, 1992. – 426 p. – (No. 215 DSP).
Komolaeva L.V.Research and development of a diamond tool and the process of drilling deep precision holes with a ratio of L/D>50 in hard brittle non-metallic materials: diss. … candidate Tech. Sciences. – K.: Inst. of Superhard Materials, Academy of Sciences of the Ukrainian SSR, 1976. – 123 p. – (No. 2 DSP).
Konoval S.M. Formation of a homogeneous structure and increase in wear resistance of superhard composites obtained by reaction sintering of cubic boron nitride with aluminum at high pressure: Diss. … Candidate of Technical Sciences: 05.02.01: Materials Science. – K.: Inst. of Superhard Materials named after V.M. Bakul, Academy of Sciences of Ukraine, 2011. – 158 p. – (No. 303).
Konovalenko V.I. Study of a scheme for forming cylindrical gears, including two rotations around intersecting axes: Diss. … Candidate of Technical Sciences: 05.03.02. – K., 1976. – (No. 98).
Kopeykina M.Yu.Increasing the wear resistance of a cutting tool made of PSTM based on KNB during high-speed turning of hard-to-machine alloys: diss. … candidate technical Sciences: 05.03.01: mechanical processing processes, machines and tools. – K. : Institute of Superhard Materials named after V.N. Bakulya National Academy of Sciences of Ukraine, 2008. – 190 p.; app.: p. 191–194. – (No. 291).
Kopylov V.I.Physico-chemical processes of plasma spraying and management of parameters responsible for increasing the performance characteristics of matrix-coating composite systems: diss. … Dr. technical Sciences: 05.02.01. – K. : Institute of Superhard Materials named after V.N. Bakulya, National Academy of Sciences of Ukraine, 1995. – 496 p. – (No. 236).
Korablev S.F.Influence of high pressures and temperatures on the structure and properties of carbides of chromium, titanium and vanadium: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials named after V.N. Bakulya National Academy of Sciences of Ukraine, 1995. – 181 p. – (No. 237).
Korzh N.Ya.Investigation of the performance of diamond wheels when grinding cast iron parts: diss. … candidate technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1978. – 269 p. – (No. 11).
Yu.V. KorotkovAdhesive joints in a composite cutting tool: diss. … candidate technical Sciences: 05.03.01. – K., 1983. – (No. 110).
Korotchenko V.L.Physical regularities and increasing the efficiency of the process of cutting iron-carbon alloys with end mills from hexanite-P: diss. … candidate technical Sciences: 05.03.01 / Kharkiv Polytechnic. inst. – Kharkiv, 1987. – 237 p. – (No. 166).
S.S. KravchenkoThe effect of plasma heating on the cutting temperature and tool durability during steel turning: diss. … candidate technical Sciences: 05.03.01. – Dnipropetrovsk, 1982. – 154 p. – (No. 102 DSP ).
Kramar V.G. Regularities of polishing stone and decorative tiles with tools based on aluminum and cerium oxides: diss. … candidate of technical sciences: 05.03.01: mechanical processing processes, machine tools and tools. – K.: V.M. Bakul Institute of Superhard Materials, NAS of Ukraine, 2004. – 201 p. – (№ 261).
Kramar G.M. Development of heat- and wear-resistant tungsten-free hard alloys based on titanium and vanadium carbides: diss. … candidate of technical sciences: 05.02.01. – K.: V.N. Bakul Institute of Superhard Materials, NAS of Ukraine, 1993. – 178 p. – (№ 226).
Krasnik V.G. Investigation of the process of diamond grinding of a multi-blade drilling tool: diss. … candidate technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1981. – 238 p. – (No. 82).
Kryvoruchko D.V.Increasing the efficiency of finishing processes on the basis of analytical modeling of the force interaction of the blade with the workpiece: diss. … candidate technical Sciences: 05.03.01 / Sumy State. Univ. – Sumy, 2002. – 205 p. – (No. 259).
Kryvosheya A.V.Research on the process of final dimensional calibration of cylindrical gears with hard alloy run-in machines on tooth lathing machines: diss. … candidate technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1981. – 320 p. – (No. 83).
Krivosheya V.V.Influence of the angle of the working cone of the deforming element on the process of deforming stretching of cylindrical holes: diss. … candidate technical Sciences: 05.03.01: processes of mechanical and physical-chemical processing; machines and tools. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1987. – 281 p. – (No. 178).
Krytsky A.D.Peculiarities of the development of hard-alloy deforming broaches for machining holes in parts made of hard-to-machine metals and alloys: diss. … candidate technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K.: Institute of Superhard Materials of the Academy of Sciences of the USSR, 1983. – 305 p. – (№ 114).
Kryl Ya.A. Regularities of formation of structure and properties of silicon nitride during sintering under high nitrogen pressure: diss. … candidate of technical sciences: 05.02.01: materials science in mechanical engineering. – K.: Institute of Superhard Materials of the Academy of Sciences of the USSR, 1983. – 210 p. – (№ 112 DSP).
Kryl Ya.A. Scientific bases of obtaining structural ceramics based on silicon nitride by the method of high-temperature gas-static compaction: diss. … doctor of technical sciences: 05.02.01: materials science. – K.: Institute of Superhard Materials named after V.M. Bakul, NAS of Ukraine, 1995. – 413 p. – (No. 235 DSK).
Kulakovsky V.N.Increasing the resistance to destruction of composite diamond-containing materials used in a drilling tool: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1988. – 189 p. – (No. 184 DSP).
Kulych V.G.Optimization of the parameters of the structure of self-bonded silicon carbide with increased impact resistance: diss. … candidate technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya, National Academy of Sciences of Ukraine, 2009. – 193 p. – (No. 295).
Kuperschmidt O.E.End diamond grinding of parts such as substrates made of semiconductor and dielectric materials for electronic devices. Development, research, implementation: dissertation … candidate of technical sciences: 05.02.08: mechanical engineering technology / Kiev Polytechnic Institute, 1973. – 197 p. – (№ 49)
Kurilyak, Tetyana Oleksandrivna. Improvement of the process of obtaining a diamond-tungsten carbide nanocomposite by modifying diamond nanopowder with tungsten-containing compounds: dissertation … candidate of technical sciences: speciality 05.02.01 – Materials science / NAS of Ukraine, V.M. Bakulya Institute of Superhard Materials. – K., 2019. – 174 p.; add.: p. 175–176. – (№ 342).
Kurilovich V.D. Improving the quality of treated surfaces of natural stone products with a diamond-polymer fiber tool: 03.05.01: machining processes, machines and tools. – K. : Institute of Superhard Materials named after V.M. Bakulya of the National Academy of Sciences of Ukraine, 2014. – 168 p. – (No. 317).
Kurys I.M.Research on the wear resistance of a carbide tool during milling of wood materials: diss. … candidate technical of science – M. : Moscow Forestry Institute, 1967. – 383 p. – (No. 45).
Kuharenko S.A.Development of composite coated powders of superhard materials based on vitreous binder and natural clay minerals to increase the performance of abrasive tools: diss. … candidate technical sciences: 05.02.01: materials science in mechanical engineering (industry). – K.: V.N. Bakul Institute of Superhard Materials, Academy of Sciences of Ukraine, 1991. – 202 p. – (№ 210 DSP).
Kutsai O.M. Optimization of optical characteristics of protective light-emitting coatings and amorphous hydrogenated carbon films: dissertation … candidate of technical sciences: 05.02.01: materials science. – K.: V.M. Bakul Institute of Superhard Materials, Academy of Sciences of Ukraine, 1998. – 162 p. – (№ 244).
Kutsai, Oleksandr Mikhailovich. Scientific foundations of the formation of improved and high-quality x carbon films of functional purpose: diss. … doctor of technical sciences: 05.02.01 – Materials science / NAS of Ukraine, V.M. Bakulya Institute of Superhard Materials. – K., 2015. – 396 p.; add.: p. 397–407. – (№ 326). – (Defense 17.03.2016).
L
Lavrinenko V.I. Scientific foundations of grinding of tool materials with directed change of characteristics of contact surfaces: diss. … doctor of technical sciences: 05.03.01: mechanical processing processes, machine tools and tools. – K.: V.M. Bakulya Institute of Superhard Materials NAS of Ukraine, 1999. – 487 p. – (№ 249).
Lavrinenko V.I. The process of deep electrochemical grinding of a tool made of high-speed steel with wheels made of superhard materials: diss. … candidate technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1983. – 224 p. – (No. 108).
Lazhevskaya O.V.Patterns of structural formation of diamond-abrasive composites based on polymers capable of reversible structural rearrangement: diss. … candidate technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya, National Academy of Sciences of Ukraine, 2006. – 192 p. – (No. 277).
Levitas V.I.Modeling of plastic flow of materials at high hydrostatic pressure: diss. … candidate technical sciences: 02.00.04: materials science in mechanical engineering. – K.: Institute of superhard materials of the Academy of Sciences of the Ukrainian SSR, 1981. – 378 p. – (№ 87 DSP).
Leshchuk A.A. Thermomechanics of spontaneous crystallization of diamonds in high-pressure apparatuses: diss. … doctor of technical sciences: 05.02.01: materials science. – K.: Institute of superhard materials named after V.N. Bakulya, NAS of Ukraine, 2004. – 324 p. – (№ 266).
Leshchuk I.V. Increasing the efficiency of the grinding process of tool materials by directed change of the characteristics of the working layer of wheels with NTM: diss. … candidate of technical sciences: 05.03.01: machining processes, machines and tools / Institute of superhard materials named after V.M. Bakulya of the National Academy of Sciences of Ukraine, 2008. – 169 p.; attachments: p. 170–189. – (No. 284).
Lyvshits V.N.Investigation of the performance of geological prospecting crowns impregnated with synthetic diamonds: diss. … candidate technical Sciences: 04.00.19: exploration technique for mineral deposits. – K. : ISM Academy of Sciences of the Ukrainian SSR, 1974. – 214 p. – (No. 30). – [Protected at the Tashkent Polytechnic Institute].
Lynenko-Melnikov Yu.P.Investigation of the work of self-rotating cutters in the destruction of rocks: diss. … candidate technical of science – Novocherkassk: Novocherkassk Polytechnic. institute named after WITH. Ordzhonikidze, 1967. – 289 p. – (No. 42).
Lysakovsky, Valentin Volodymyrovych. Scientific principles of high-performance directed growth of structurally perfect diamond single crystals of types Ib and Iia: diss. … doctor of technical sciences: 05.02.01 – Materials science / NAS of Ukraine, V.M. Bakuly Institute of Superhard Materials. – K., 2021. – 334 p. – (№ 349).
Lisovsky A.F. Sintered composite materials with controlled distribution of binder metal: diss. … doctor of technical sciences: 05.02.01: materials science in mechanical engineering. – K.: Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1984. – 383 p.; appendices: p. 384–472. – (№ 131 DSP).
Litoshenko N.V. Regularities of influence of residual thermal microstresses and dispersion of carbide grain sizes on deformation characteristics of hard alloys: Diss. … Candidate of Technical Sciences: 05.02.01: Materials Science. – Kyiv: V.M. Bakul Institute of Superhard Materials, NASU, 2002. – 179 p. – (№ 254).
Lobanova L.V. Efficiency of application of tungsten-free and low-tungsten materials for working elements of deforming broaches: Diss. … Candidate of Technical Sciences: 05.03.01: Mechanical and physical-chemical processing processes; machines and tools. – Kyiv: Institute of Superhard Materials, NASU, 1987. – 208 p. – (№ 172).
Loginov Y.V. Investigation of grinding processes with variable modes: Diss. … Candidate of Technical Sciences: Sciences: 05.03.01 / Tolyat Polytechnic. inst. – Tolyatti, 1979. – 225 p. – (No. 21).
Loev V.Yu.Improvement of the finishing treatment of flat surfaces of parts by combining cutting with surface plastic deformation: dissertation. … candidate.. tech.. science: 03.05.01 / Zhytomyr state. technologist. Univ. – Zhytomyr, 2005. – 250 p. – (No. 272).
Loshak M.G.Investigation of some regularities of fatigue failure of hard alloys under shock load application: diss. Ph.D. technical Sciences: 022: resistance of materials. – K. : ISM; IPM Academy of Sciences of the Ukrainian SSR, 1968. – 223 p. – (No. 39).
Loshak M.G.Hardening of tungsten hard alloys by heat treatment and surface deformation: diss. … Dr. technical Sciences: 05.02.01: materials science in mechanical engineering; 01.02.06: dynamics, durability of machines, devices and equipment. – K. : Institute of Superhard Materials of the Academy of Sciences of Ukraine, 1992. – 499 p. – (No. 221 DSP).
Lukash E.S.Research of the structure and properties of vacuum condensates Ti, TiC–Co, TiB2, ZrB2 and the development of electron beam technology for applying wear-resistant coatings on cutting carbide tools: diss. … candidate technical of science – K. : IES named after E.O. Paton, 1980. – 170 p. – (No. 75 DSP).
Lungol I.V.Increasing the efficiency of the deforming instrument and when drawing deep holes: Diss. … Candidate of Technical Sciences 05.03.01. – K.: ISM AN UkrSSR, 1988. – 220 p. – (№ 181 DSP).
Lysakovskiy V.V. Regularities of diamond crystallization on seed in solution-melt systems Fe–Co–Ti(Zr)–C: Diss. … Candidate of Technical Sciences: 05.02.01: materials science. – K.: V.N. Bakul Institute of Superhard Materials NASU Ukraine, 2008. – 135 p. – (№ 289).
Lyudvichenko, Oleksiy Petrovich. Influence of resistive heating conditions of a high-pressure cell on the crystallization of GaN from the solution-melt system Fe–Ga–N: Diss. for the degree of Doctor of Philosophy: Special. 132 – Materials Science / NAS of Ukraine, Institute of Superhard Materials named after V.M. Bakula – K., 2024. – 161 p. – (No. 358 Diss.).
M
Makovetsky V.V.Development of the process of layering surfaces in order to increase their wear resistance: diss. … candidate technical Sciences: 05.03.01: processes of mechanical and physical-chemical processing; machines and tools. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1986. – 218 p. – (No. 159 DSP).
Maksimenko V.A.Increasing the tribotechnical characteristics of the surfaces of steel parts by the method of combined impact with antifriction and deforming tools during honing: diss. … candidate technical Sciences: 05.03.01: processes of mechanical and physical-technical processing; machines and tools. – K. : Institute of Superhard Materials named after V.N. Bakulya National Academy of Sciences of Ukraine, 1994. – 207 p. – (No. 234).
V.I. MalyshevIncreasing the efficiency of high-speed grinding due to the improvement of the adjustment of abrasive wheels: diss. … candidate technical of science 05.03.01. – Tolyatti, 1986. – 258 p. – (No. 157).
Manokhin A.S.Increasing the productivity of fine turning of hardened steels with an oblique single-edge tool with PSTM based on KNB: diss. … candidate technical Science: 05.03.01: mechanical processing processes, machines and tools. – K. : Institute of Superhard Materials named after V.N. Bakulya National Academy of Sciences of Ukraine, 2009. – 185 p.; app.: p. 186–216. – (№ 293).
Matviychuk, Oleksandr Oleksandrovich. Regularities of gas-phase carburization of WO3 to WC carbide in the quaternary system W–C–H–O and structure formation during sintering of wear-resistant composites from it: diss. … candidate of technical sciences: 05.02.01 – Materials science / NAS of Ukraine, V. M. Bakuly Institute of Superhard Materials. – Kyiv, 2018. – 191 p.; add.: p. 200–225. – (№ 338).
Melniychuk Yu.O. Features of turning coatings with an amorphous-crystalline structure: diss. … candidate of technical sciences: 05.03.01: mechanical processing processes, machine tools and tools. – Kyiv: V. M. Bakuly Institute of Superhard Materials. Bakulya of the National Academy of Sciences of Ukraine, 2002. – 200 p. – (No. 257).
Melnyk V.E.Shaping of large-sized cylindrical gears with special worm cutters taking into account the initial profile of the workpiece: diss. … candidate technical Sciences: 05.03.01: mechanical processing processes, machines and tools. – K. : Institute of Superhard Materials named after V.N. Bakulya National Academy of Sciences of Ukraine, 2013. – 156 p.; app.: p. 157–186. – (No. 311).
Mechnyk V.A.Scientific basis of creating composites of the diamond–Fe–Cu–Ni–Sn system by directed control of their structure formation: diss. … Dr. technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.M. Bakulya of the National Academy of Sciences of Ukraine, 2014. – 385 p.; attachments: p. 386–405. – (No. 316).
Mechnyk V.A.Increasing the efficiency of stone cutting with diamond wheels due to the minimization of thermal stress in diamonds on the working surface of the tool: diss. … candidate technical Sciences: 05.03.01: processes of mechanical and physical-technical processing; machines and tools. – K. : Institute of Superhard Materials named after V.N. Bakulya Academy of Sciences of Ukraine, 1991. – 160 p. – (No. 207).
Mishnaevsky L.L.Research of the process of finishing grinding of cylindrical surfaces with the face of a diamond wheel: diss. … candidate technical Sciences: 171: theory of machining. – K. : ISM, 1968. – 202 p. – (No. 44 DSP).
Mochalov V.D. Study of physical phenomena and surface quality during diamond-electroerosion grinding: dissertation … candidate of technical sciences: 05.03.01. – Kharkov: KhPI, 1980. – 206 p. – (№ 57).
Mochsil, Viktor Evgenovich. Regularities of formation of the structure of fused textured YBaCuO ceramics with a high level of superconducting and mechanical properties under controlled oxygen pressure: dissertation … candidate of technical sciences: 05.02.01 – Materials science / NAS of Ukraine, V.M. Bakul Institute of Superhard Materials. – K., 2019. – 261 p.; add.: p. 262–278. – (№ 343).
Mukovoz Yu.A. Study of the machining ability of some high-hard irons by turning: dissertation … candidate technical Science: 05.171: theory of cutting. – K. : Gosplan of the Ukrainian SSR. ISM – 1971. – 145 p. – (No. 48). – [Protected at Kyiv Polytechnic Institute].
N
Nagorny P.A.Patterns of diamond synthesis in growth systems containing iron-based carbon solvents: diss. … candidate technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya, National Academy of Sciences of Ukraine, 2004. – 288 p. – (No. 268 DSP).
Nagornyak S.H.Synthesis of tool and machine tools based on the analysis of the kinematics of blade processing: diss. … Dr. technical Sciences: 05.03.01. – K. : ISM Academy of Sciences of the Ukrainian SSR, 1991. – 37 p. – (No. 208).
Nazarchuk S.M. High-pressure sintering of diamond powders of two dispersion levels for obtaining wear-resistant polycrystalline composites with increased thermal stability: Dissertation … Candidate of Technical Sciences: 05.02.01: Materials Science. – Kyiv: V.M. Bakul Institute of Superhard Materials, NAS of Ukraine, 2011. – 152 p. – (No. 304).
Naydenko A.G. Determination of the reliability of diamond composite STM cutters by registration and analysis of acoustic emission: Dissertation … Candidate of Technical Sciences: 05.03.01: Machining processes, machines and tools. – Kyiv: V.N. Bakul Institute of Superhard Materials, NAS of Ukraine, 2009. – 130 p.; appendices: p. 131–161. – (No. 292).
Nalyvka G.D.Magnetic abrasive materials based on carbides and borides: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1984. – 180 p. – (No. 116).
Nevstruev G.F.Investigation of magnetic properties of synthetic diamonds and development of low-toxic technology for obtaining powders with specified properties: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1981. – 242 p.; app.: p. 243–267. – (No. 78).
Yu.Y. NekrasovInvestigation of the technological efficiency of processing hard-to-machine materials on CNC lathes during control of the loading processes of the cutting part of the tool: diss. … candidate technical Science: 05.03.01 / Tyumen Industrial Institute – Tyumen, 1981. – 253 p. – (No. 85).
Nemyrovsky Ya.B.Study of the process of deforming hole drawing with the aim of optimizing the tool with a group arrangement of working elements: diss. … candidate technical Sciences: 05.03.01: processes and machines for processing materials by cutting; automatic lines. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1981. – 281 p. – (No. 84).
Nikitin Yu.A.Scientific basis of formation and assessment of functional suitability of gas-filled polymer-graphite composites: diss. … Dr. technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya of the National Academy of Sciences of Ukraine; NAU; Aerocosmic Institute, 2010. – 399 p.; app.: p. 400–446. – (No. 299 DSP).
Noskov V.V.Improving the quality of grinding of cold-rolled rolls by continuous grinding of an abrasive wheel: diss. … candidate technical Sciences: 05.03.01. – K. : ISM of the Academy of Sciences of Ukraine, 1994. – 179 p. – (No. 233).
AT
Oborsky G.A.Scientific basis of ensuring parametric reliability and dynamic quality of technological systems of precision processing: diss. … Dr. Tech.. Sciences: 05.03.01. – Odesa: Odesa national. polytechnic University, 2006. – 299 p.; app.: p. 300–331. – (No. 276).
Oleynyk N.A.Development of diamond synthesis product processing technology: diss. … candidate technical Sciences: 05.02.01: materials science. – K. : Institute of Superhard Materials named after V.N. Bakulya, National Academy of Sciences of Ukraine, 2005. – 160 p. – (No. 270 DSP).
Oleinikov A.B.Performance of diamond elastic wheels when grinding gas-thermal coated: diss. … candidate technical Sciences: 05.03.01: processes of mechanical and physical-technical processing; machines and tools. – K. : Institute of Superhard Materials of the Academy of Sciences of the Ukrainian SSR, 1990. – 205 p. – (No. 196).
Orap A.A. Research on wear-resistant diamond-galvanic coatings of moving parts: diss. … candidate of technical sciences: 05.161: mechanical engineering and machine parts. – K.: Institute of Superhard Materials of the Academy of Sciences of the USSR, 1970. – 175 p. – (№ 26).
Osadchy O.A. Increasing the stability of a tool with KNB during finish turning of hardened steels by ensuring vibration resistance of cutters: diss. … candidate of technical sciences: 05.03.01: mechanical processing processes, machine tools and tools. – K.: Institute of Superhard Materials named after V.M. Bakul, NAS of Ukraine, 2013. – 155 p. – (№ 309).
Osipov A.S.Formation of the structure of heat-resistant polycrystalline material based on diamond and silicon carbide under high pressure conditions: diss. … candidate technical Sciences: 05.02.01: materials science in mechanical engineering. – K. : Institute of Superhard Materials named after V.N. Bakulya National Academy of Sciences of Ukraine, 1995. – 136 p. – (No. 238).